1. Working principle:
The advantage is that it accurately measures flow regardless of the viscosity or density of the fluid being measured. It is also a durable device with no moving parts, making it low maintenance and long-lasting.
|
|
|
|
|
|
|
|
2. Classification of vortex flowmeters:
※Split type (pulse type + flow totalizer, if the medium temperature is greater than 250 degree , the split type must be used),
3. Application scope:
The vortex flow meter is a multi-functional flow measurement device that is widely used in many industries. Its unique design utilizes the vortices created by flowing fluid to determine flow rate.
Application One: Oil and Gas Industry. They are commonly used to measure the flow of natural gas, crude oil, and refined products such as gasoline and diesel. Its high-precision characteristics and reliability make it ideal for these applications.
Application 2: Chemical and petrochemical industry. They are used to measure the flow of a variety of liquids and gases, including corrosive and abrasive liquids. They can be used in hazardous environments, such as those containing explosive or toxic gases.
Application 4: Water and wastewater treatment industry. They can be used to measure the flow of raw, treated and wastewater. They can also be used to measure the flow of chemicals used in treatment processes.
4.Structure and size:
5.Flow meter flow range:
(1) Flow range table for measuring liquids and common gases:
|
|
|
|
||
|
|
|
|
|
|
|
DN15 (1/2") |
0.3 |
3 |
3 |
30 |
|
DN20 (3/4") |
0.6 |
6 |
6 |
60 |
|
DN25 (1"） |
1.0 |
12 |
10 |
120 |
|
DN32（1.2") |
1.2 |
15 |
12 |
180 |
|
DN40 (1.5") |
1.5 |
31 |
15 |
275 |
|
DN50 (2") |
2.2 |
49 |
25 |
458 |
|
DN65 (2.5") |
3.6 |
84 |
40 |
730 |
|
DN80 (3") |
5.5 |
127 |
55 |
1008 |
|
DN100 (4") |
8.5 |
198 |
85 |
1550 |
|
DN125 (5") |
13.3 |
309 |
140 |
2566 |
|
DN150（6"） |
19.1 |
445 |
190 |
3483 |
|
DN200 （8") |
34 |
790 |
340 |
6230 |
|
DN250 (10") |
70 |
900 |
700 |
9000 |
|
DN300 (12") |
130 |
2100 |
1200 |
21000 |
|
DN350 (14") |
180 |
2500 |
1500 |
25000 |
|
DN400 (16") |
230 |
3400 |
2000 |
34000 |
6.Sensor production workshop:
|
|
|
|
|
|
7. Installation requirements:
(1) The ambient temperature of the installation site should meet the technical requirements
(2) The installation location should not have strong vibration and strong magnetic field interference. Vibration reduction measures should be taken when there is strong vibration
For example, use vibration-absorbing supports or vibration-absorbing soft rubber pads.
(3) The installation location should ensure easy installation and maintenance.
(4) The area around the installation site should not be filled with corrosive gases or flooded.
(5) Avoid direct sunlight or exposure to the sun for long periods of time. In this case, necessary shading measures should be taken.
(6) The direction of the flow arrow on the sensor should be consistent with the direction of fluid flow in the pipe.
(7) When measuring liquid, make sure the pipeline is full. When vertical installation is required, the fluid should flow from bottom to top.
(8) The flow regulating valve should not be installed upstream of the flow meter, but should be installed downstream of the flow meter.
(9) The upper and lower parts should be configured with straight sections of sufficient length according to the site conditions.
|
|
|
|
|
|
||
|
|
15DN |
5 DN |
|
|
25DN |
|
|
a 90 degree elbow |
25DN |
|
|
Two 90 degree elbows in the same plane |
25DN |
|
|
Two different plane 90 degree elbows |
40DN |
|
|
|
15DN |
|
|
|
40DN |
|
|
|
It is recommended to install outside the 10 DN downstream of the meter. |
|
(10)The installation method is as shown below:
8.FAQ:
1. Q: Are you a manufacturer?
A: Of course, we have 20 years of manufacturing experience in China, and we can provide OEM, ODM.
2. Q: What is the minimum order quantity PCS?
A: Our minimum order quantity is 1PCS.
3.Q: How long is the delivery time?
A: We will determine the delivery time based on your purchase volume and transportation time. If your purchase volume is less than 50 PCS, our production time is estimated to be 7 working days. The transportation time will be determined based on your delivery address and Shipping method calculates shipping time.
4.Q: What are the payment methods?
Popularne oznake:
